Horizontal Installation Instructions, Wood Blinds, Faux, Shutters, Plantation. BlindsOnSale.com, Inc.


View Cart		Order Status		Quote Form		Shipping Info

Window Shades

Sheer Blinds & Shades

Window Blinds

Wood Blinds - Alternative

Other Options

Shop by Brands

"This web site is secured using a thawte Digital Certificate. This ensures that all information you send to us via the World Wide Web will be

encrypted. Please click on the thawte Trusted Site Seal which demonstrates our commitment to your security."

Horizontal Blinds Installation Instructions

Installation

Measuring

Mounting Brackets

The box style mounting brackets are designed to work in all possible mounting applications. The diagram at the bottom of the page indicates which screw holes to use for each option.

Mount brackets as shown below. Always use all brackets supplied. All blinds 48" or wider, require the use of center support brackets. Be sure to mount the support bracket(s) in position(s) that will not interfere with the lift mechanisms. The tek screw should screw into the head rail after the wood blind is mounted.

2 inch horizontal blinds

Screw Holes

	Always use at least two screws per bracket to ensure a strong, secure mount.

All blinds require two end brackets
Blind Width	# of Center Support Brackets
over 48"	1
over 96"	2
When using extension Brackets:
Blind Width	Support Brackets
over 30"	1
over 60"	2
over 90"	3
All 2 on 1s receive 1 support Bracket. All 3 on 1s receive 2 support Brackets. Center support brackets for 2 on 1Ùs and 3 on 1Ùs should be placed between panels.

Position the headrail in the box brackets as shown. Swing the covers down and snap them closed. Secure headrail to center support bracket with a Tek screw.

Valance Assembly

Slide one end of a corner connector into the channel on the back of the return. Slide the opposite end into the channel on the back of the valance.

Repeat for the second return.

Valance

Peel the release liner off one side of a Dual-lock set and place it on the headrail, directly above one of the ladderbraids, pressing down firmly to adhere. Repeat for remaining ladderbraid positions.

Peel the release liner off the remaining side of the Dual-lock set and position the Valance over the headrail. Press the Valance firmly against the Dual-lock and hold for 10 seconds.

If repositioning of the Valance is necessary, wait 24 hours if possible. The Dual-lock adhesive reaches 90% bond strength after 1 hour and 100% after 24 hours.

Dual-Lock Fasteners

Tilt Wand Attachment

	Extension Brackets require a 2" flat surface for mounting. Nuts and bolts are provided for attachment

Hold Down Brackets

Made of Molded Clear Plastic. Fits into pre-drilled hole in the bottom rail to secure the bottom rail in place. (Generally used on door shades.)
Hold Down Bracket


BlindsOnSale.com, Inc. P.O. Box 130 Tuttle, OK 73089	©1999-2008 BlindsOnSale.com Privacy Statement	Toll Free: 800-919-4301 Telephone: 405-947-4949 Fax: 405-381-3926