Helpful
Tips:
| Use
a steel measuring tape for accurate measurement. |
| Please
measure width and height of window opening at three
places. |
| For
outside mount use largest measurement. |
| For
inside mount use smallest measurement and measure
window diagonally also for squareness. If the difference
between two measurements is greater than 1/2",
we recommend to consider an outside mount installation. |
 When
louvers are fully open they project from back of
the panel. So please make sure that there is enough
clearance for louvers to operate freely without
hitting any obstruction like window glass, molding,
crank, handle etc. |
| To
prevent delay in order handling, please make sure
all information is filled out in order form. |
| Shutters
are custom made for your specific window, so once
order is in production we can not accommodate any
changes in order. |
Woodlore
Custom Shutters Key Chart
| 1. |
Item
#: Starts with window #1 and continue. |
| 2. |
Room:
In which room is window located. |
| 3. |
Qty.:
Numbers of windows of same specification. |
| 4. |
Size
Type: Please indicate, measurements you
are providing are window size or max. frame to frame
by checking appropriate box. |
| 5. |
Width:
Width measurement. |
| 6. |
Height:
Height measurement. |
| 7 |
Mount
Type: IM = Inside Mount |
| 8. |
Frame
Type:
ZL
= Large Z frame
ZT = Trim Z frame
Z-Tilt = Tilt out Z
L = Standard L frame
|
D
= large deco frame
SD = small deco frame
HS = hang strip
LP = L frame with plain insert
|
ZL,
ZT, or Z-Tilt + SP = Z frame + sill plate
at bottom
|
Hang strip inside mount: Only 2 hang strips (sides)
+ 2 light blocks (top and bottom) will be provided.
Hang strip outside mount; standard will be hang
strip on side of panel. If hang strip is supposed
to go behind the panel (same as hang strip inside
mount) please mention in special instruction. |
| 9. |
# of sides: How many sides framing will
go around.
| 2
sided = 2 frame |
3
sided = 3 frame |
3
sided inverted = 31 (cafe) |
 |
|
|
| 2
sided = 2D-Sill or = 2M-Sill |
3
sided - 3D-Sill or 3 M-Sill |
4
sided = 4 frame |
|
|
|
D-Sill = Deco Sill Frame at bottom. Exposed ends
of Frame will be painted but no returns will be
provided.
M-Sill = Marble Sill Cap at bottom (please provide
length, thickness and projection from wall of an
existing sill in special instruction area.) |
|
| 10. |
Extension
Frame: Write Yes if Extension frame needed
for louver clearance otherwise leave blank.
 |
| 11. |
Color:
White = W, Alabaster = A |
| 12. |
Louver
Size:
Four options. 1 7/8", 2 1/2", 3 1/2",
4 1/2".
Note: There is 10% surcharge for 1 7/8". |
| 13. |
Total
# of Panels::
Total panels in window opening.
Max. single panel width = 30"
Max bifold panels combined width = 48" |
| 14. |
Panel
Fold Configuration: Start from left panel
and write L for panel folding left side and R for
panel folding right side. If there is a T post write
T after panel fold letter according to location
of T post.
 |
| 15. |
Double
Hung:
Double hung panels = DH
10% surcharge
Total # of panels should include all panels
in both rows but provide panel fold for only one
row. |
| 16. |
Divider
Rail or Double Hung Location: Divider rail
will be required on all panels over 64" in
height. Write C for divider rail in center. If divider
rail wanted at specific location. please provide
distance of center of divider rail from the bottom
according to size measurement. To ensure proper
panel layout, we will not guarantee exact requested
location. It could be off by 1 1/2" plus or
minus. If divider rail location field is
left blank or marked No for panels over 64"
height, divider rail will not be provided and the
warranty will be automatically waived. |
| 17. |
T
post: If T post required, please select
from 1" or 1 3/4" face T post by checking
appropriate box and provide distance of center of
T post from left side according to size measurements
are given. If T post is to be centered, write C. |
| 18. |
Overhead
Track:
Bifold Track = BF
Bipass Track = BP
Our standard box out frames, tracks and all hardware
will be provided. Please specify if box out frame
not required. For Bipass track please provide small
diagram which explains how panels will overlap.
|
| 19. |
Hinge
Finish:
White = W, Alabaster = A, antique Brass = AB, Stainless
Steel = SS
5 % surcharge for Stainless Steel = SS |
|
encrypted. Please click on the thawte Trusted Site Seal which demonstrates our commitment to your security."
