 "This web site is secured using a thawte Digital Certificate. This ensures that all information you send to us via the World Wide Web will be encrypted. Please click on the thawte Trusted Site Seal which demonstrates our commitment to your security." |
|
Hunter Douglas Applause Honeycomb Shades
Measuring Guidelines - Page 2 |
|
|
|
HOW TO MEASURE FOR
UNEQUAL WIDTHS ON TWO-
OR THREE-ON-ONE HEADRAIL |
| 1. |
Measure the overall width. Use the narrowest measurement with inside mounts. With outside mounts, we recommend 3" overlap on all sides. |
| 2. |
Without moving the tape, measure the location of the desired split (usually a vertical mullion). |
| 3. |
Enter all measurements on the order form – overall width, left panel width, center panel width (if required), right panel width, and height. |
| 4. |
All panel widths combined must equal the overall width. |
| 5. |
The smaller panel must be at least 1/3 the size of the larger panel (Silhouette® and Nantucket™ shadings only). |
|
|
| STACKBACK MEASURING PROCEDURES |
|
|
For a window opening that is to be fully uncovered when the treatment is drawn open. |
|
|
For outside-mounted treatments.
| 1. |
Measure the desired Uncovered Width, rounding your measurement down to the nearest 1/8". With side stack units, include the desired amount of overlap for the side opposite the fabric stack in this measurement. Refer to product specifications for recommended overlaps, also taking into consideration trim or molding. |
| 2. |
Using the stackback charts created for the product in each product section, locate the Uncovered Width (clear opening) measurement under Split Stack or Side Stack design. |
| 3. |
Find the corresponding "Stackback" for that range. |
| 4. |
Add the Stackback to the Uncovered Width to get the correct width to order. |
| 5. |
After determining the correct width to order, confirm that there is enough room to outside mount the treatment on the opening at that width. |
|
|
|
|
|
|
|
| |
|
