 "This web site is secured using a thawte Digital Certificate. This ensures that all information you send to us via the World Wide Web will be encrypted. Please click on the thawte Trusted Site Seal which demonstrates our commitment to your security."
|
|
Horizons Averte Natural Fold
Measuring |
|
|
Outside Mount:
Width: Measure the exact width of the window or sliding door including the trim (if there is any). We recommend adding a minimum overlap of 3” on each side of the window. Additional overlap can also be added to allow for complete stack-back.
Height: Measure the exact height of the window or sliding door including the trim. If you want the Averté to go all of the way to the floor, measure to the floor. We recommend mounting the Averté to the wall above the window frame. At the top add 3” for the bracket height. Below the window add the distance you want the Averté to hang (usually about 2”).
Inside Mount:
Width: Measure the exact width of the opening at the top where the track will be mounted. Be precise, the factory only makes a 1/4” deduction to the track’s width to fit inside.
Height: Measure the exact height of the opening in three places (right, middle and left). Give the shortest height. The factory will deduct 1/2” from the total unit’s height (which includes the track and carriers). When an inside mount Averté is ordered with a valance, the factory will also make the allowance for the valance board’s thickness.
|
|
|
|
