Roller Shades
The Spring Roller version of Shades of Elegance™ relies on the tried-and-true reliability of the classic Spring Roller shade. Completely cordless, just a tug allows easy adjustment to any height.
The Clutch Roller version gives an added degree of control and also allows the shade to be made in larger sizes. The clutch upgrade is available at no extra charge.
Standard Features
Spring Roller:
• Sturdy Wood Roller
• Clear Plastic Grip
Clutch Roller:
• Heavy Duty Metal Roller
• Nylon Beaded Chain Controls
Extra Charge Options
• Decorative Trimmings*
• Contempo Scallop*
• Decorative Pulls*
• Classic Valance*
* not available in Siesta mylars.
Size Limitations
Minimum Spring Roller Width: 20”
Minimum Clutch Roller Width: 8”
Maximum Spring Roller Width*: 73”
Maximum Clutch Roller Width*: 144”
*See fabric Index for specific fabric size limitations on page H23.
Maximum Spring Roller Heights:
| Width |
Max. Height |
| 46” |
108” |
| 55” |
96” |
| 73” |
84” |
Maximum Clutch Roller Height: See Chart on Page H23.
Roller Wrap
Extra length is automatically added to allow for the top of the shade to wrap around the barrel. |
Roller Shade Measuring Terms
BB (Bracket-to-Bracket) Size is the exact size of the shade when mounting it to the trim and placing the brackets right at the edge of the trim. Please note that the fabric width of the shade will be approximately 1 1/2” narrower than the bracket-to-bracket size. *Bracket-to- Bracket is not used with Spring Roller Shades.
CM (Cloth Measurement) Size is the width of the cloth on the shade barrel. Specify “CM” for outside mounts when a specified fabric width is required and there is room to move the brackets.
TT (Tip-to-Tip) Size is the exact size of the entire shade unit. Specify “TT” when you have made your own size adjustments. *Tip-to-Tip is not used with Clutch Roller Shades.
IM (Inside Mount) Size is the exact width of the window opening. Specify “IM” when you want the factory to make a 1/8” deduction from the window opening size so the shade can fit inside.
Inside Mount Information
Due to hardware requirements, there are edge light gaps on all roller shades. These can vary slightly based on shade size and shade material. To avoid light gaps, Outside Mount is recommended.
 |
Spring Roller’s gap is 5/8” on each side. |
 |
Clutch Roller’s gap is 3/4” on each side. |
|
Installation Brackets
| Clutch Roller Brackets: |
Universal Clutch Brackets:
The standard bracket Clutch Roller controls. can be used for wall, ceiling, or inside mount. |
 |
Extended Brackets:
This bracket adds 1/2” clearance for use when mounting over trim. |
 |
| |
|
| Spring Roller Brackets: |
Wall Brackets:
For mounting on the trim on the wall next to a window with no trim. |
 |
Extended Wall Brackets:
For mounting on the wall to the trim. It projects shade out far enough clear standard trim. |
 |
Inside Mount Brackets:
For all standard inside mount installations. |
 |
Ceiling Brackets:
For mounting the shade up into the ceiling or soffit. |
 |
Footless Brackets:
For inside mount installation with limited depth. |
 |
Reverse Roll Brackets are also available.
Chains on Clutch Shades
Clutch Roller Shades will have a nylon beaded chain control in white, off-white, grey, or black. B&W will determine the best color match unless otherwise specified. A metal chain in Silver or Bronze is also available at no extra charge, but must be specified when ordering. (Chains on Clutch Roller Shades will be approximately 3/4 of the length of the shade.)
Metal Bottom Rail
All mylar shades and mesh roller shades are constructed with weighted metal bottom rails in white, brown, and black (B&W will automatically coordinate) that cannot accommodate Contempo Scallops™ or Decorative Pulls. |
"This web site is secured using a thawte Digital Certificate. This ensures that all information you send to us via the World Wide Web will be encrypted. Please click on the thawte Trusted Site Seal which demonstrates our commitment to your security."
.
.
