Comfortex Stardust Soft Sheer Vertical Blinds, Options. BlindsOnSale.com

Stardust Finished Dimension:
Once ordered and manufactured, the width of the Stardust fabric cannot be altered. Comfortex makes deductions to the width of the Stardust Window Shadings depending on the type of mounting indicated.

Finished Dimensions
BlindsOnSale.com makes deductions to the width of the Stardust Soft Sheer Verticals depending on the selected mounting type.

Inside Mount:
•	Side Stack - Fabric will measure ordered width less	1/4"
•	Split Stack - Fabric will measure ordered width less	1/4"
•	Bottom - Fabric will measure ordered length less	1/2"
•	Valance will measure ordered width less	1/8"

Outside Mount:
•	Blind width will measure as ordered regardless of Side or Split stack.
•	Blind length will measure as ordered. No deductions will be made.
•	Valance width will measure as ordered plus	1"
•	Valance returns will measure	7"
•	Valance height will measure	2-7/8"
If you want a smaller return, please note in comment section of the order form.

Side (End) Mount:
•	Side Stack - Fabric will measure ordered width less	3/4"
•	Split Stack - Fabric will measure ordered width less	3/4"
•	Bottom - Fabric will measure ordered length less	1/2"
•	Valance will measure ordered width less	1/8"

Mounting Information

Inside Mount:
Minimum depth	2-1/4"
Minimum depth for flush inside mount	6-5/8"

Outside Mount:
Minimum surface area required for mounting	1-3/4"

Side Mount:
Minimum depth for side mount	1-3/4"
Maximum blind width for side mount	48"

Outside Mount Fascia Rods

Outside Mount:
Standard mounting bracket can accommodate returns from	4-3/8" to 6"
Standard returns measure	6"

Note on Specifications
Due to variations in fabric weave and environmental conditions, the finished dimensions for both width and length may vary, plus or minus 1/8", from your order measurements.

Center Gap
The center gap is the distance between fabric panels of a split stack design when the vanes are open and rotated as well as closed.

•	Center gap, open and rotated:	less than 1/4"
•	Center gap, closed:	less than 1/2"

Vane Closure Gap
When Stardust vanes are in the closed potions, they always overlap but they may not always touch. The vane closure gap is the maximum distance between closed overlapping vanes, the vane closure gap is up to 1/2".

Stacking Design
Stardust Sheer Verticals are available in side or split stack designs. Either design may be mounted inside or outside of the window opening, The rotation chain and traverse cord must be placed on the same side and cannot be split.

•	Side stacks may draw open to the left or right side. The controls may be placed on the same side of the stack or the opposite side. Controls cannot be split.
•	Split stack shadings draw open to both sides equally.

Note on Stacking
When Stardust Verticals are in the stacked position the vanes may flare slightly. This is considered normal and does not constitute a failure in workmanship or materials. The possible flare has been shown through case study not to detract from the beauty of the product.


BlindsOnSale.com, Inc. P.O. Box 130 Tuttle, OK 73089	©1999-2008 BlindsOnSale.com Privacy Statement	Toll Free: 800-919-4301 Telephone: 405-947-4949 Fax: 405-381-3926