 "This web site is secured using a thawte Digital Certificate. This ensures that all information you send to us via the World Wide Web will be encrypted. Please click on the thawte Trusted Site Seal which demonstrates our commitment to your security."
|
|
Bali Northern Heights™ Wood Blinds - Features
Sandblast |
|
|
| Features |
| |
• Crafted predominately of North American hardwood
• Cord tilt standard, wand tilt optional
• Color-coordinated ladders, cords and tassels
• Standard wood valance, optional premium valances
• Valance returns standard on (need to be requested on inside mount)
• Cloth tape option
• NoHoles™ option – not available with cloth tape option
• Trapezoid bottomrail option for superior closure
• Patented SureTight® headrail
• Limited lifetime warranty
|
| Size Considerations |
| Minimum Shade Width: |
| |
9" outside mount |
| |
9 1/2" inside mount |
| Exceptions: |
| |
9" to 11 15⁄16" are center tilt only |
| |
12" to 16" standard or reverse standard controls only |
| |
16 1 ⁄16" minimum for same side controls |
| Maximum single blind width: 96" |
| Maximum width – Multiple blinds on one headrail: 120" |
| Minimum blind height: 10" |
| Maximum blind height: 120" |
| Minimum depth required for inside mount: 1 3⁄4" |
|
|
|
|
| Cut-Out Blinds |
Bottom Corner
No charge. Maximum cut-out is 1" before rout hole (corner and side cut-outs only). Diagram of cut-out is required
NOTE: Not available with Controlmate®. |
| Multiple Blinds on One Headrail |
Two or more blinds can be installed on a single headrail to provide a practical treatment for larger windows or sliding patio doors.
| Options: |
| Standard controls: |
| Two on one headrail |
– Left panel (tilt and lift left) |
| |
– Right panel (tilt and lift right) |
| Three on one headrail |
– Left panel (tilt and lift left) |
| |
– Right panel (tilt and lift right) |
| |
– Center panel (tilt left/lift right) |
| Measuring: |
| 1. |
Measure overall width of the area to be covered. If space permits, an overlap of 11⁄2" per side is recommended for outside mounts. |
| 2. |
Measure the width of the area each blind is to cover. Measure and specify the left blind first, continuing to the right. Allow a minimum of 1⁄4" between blinds for operating clearance (Note: 1⁄2" gap for NoHoles™ blinds). |
| 3. |
Total width of all blinds, plus clearance(s) must equal overall width. |
| 4. |
Measure height as follows: |
| |
a. |
For windows, use standard inside or outside measuring procedures. |
| |
b. |
For patio doors, measure height within 3⁄4" of floor, either from ceiling or a point at least 6½" above the door frame. |
|
| Ordering: |
| 1. |
Indicate quantity of blinds that are to be mounted on one headrail. |
| 2. |
Specify total width of headrail. |
| 3. |
Indicate each panel width separately, specify left blind first, continuing to the right. |
| 4. |
Specify control positions, if other than standard. |
 |
| Ladder Count Table |
| Bali Northern Heights™ 2" |
NOTE: Take any inside mount deductions before determining ladder quantity.
| Inside Mount = -1⁄2" |
Outside Mount = no deduction |
|
| Finished Blind Width |
Number of Ladders |
Number of Lifts |
| 9" to 11 15⁄16" |
2 |
2 |
| 12 to 24 |
2 |
2 |
| 24 1⁄16 to 36 |
2 |
2 |
| 36 1⁄16 to 60 |
3 |
2 |
| 60 1⁄16 to 84 |
4 |
4 |
| 84 1⁄16 to 96 |
5 |
4 |
|
| ControlMate® Remote Control Options |
| FEATURES |
SIZE SPECIFICATIONS |
Convenient
• Allows for easier operation of blinds in high windows, hard to reach windows, behind furniture and above sinks or bathtubs
Easy to Use
• Operates blind with the simple push of a button, or can be programmed to open and close automatically based on outside light conditions
No Costly Hard Wiring
• Battery operated (AA Batteries included), ready to install and operate, no electrician needed
Extended Battery Life
• Bali products feature long life lithium batteries standard in every ControlMate motor for up to 5 years of use without changing batteries
Warranty
• ControlMate covered by a limited lifetime warranty
Limitations
• Not available with hold-down brackets • Not available with specialty options • Tilt on the left only • Will tilt blinds only – will not raise and lower blind |
| Min. Width: |
19" exact |
| Max. Width: |
96" |
| Max. Height: |
120" |
| Max. Size: |
6,048 sq. in. |
Example:
72" wide x 96" high = 6,912 sq. in. (over max. size)
18" wide x 62" high = 1,116 sq. in. (under min. width)
67" wide x 84" high = 5,628 sq. in. (acceptable)
To use this size chart:
1. Determine your blind width and height dimensions.
2. Make sure dimensions are within minimum and maximum size specifications listed.
3. Multiply width times height. Round each dimension up to nearest inch for easy calculation to obtain blind size in square inches.
4. Make sure your calculated blind sizes are within the required size specifications listed.
5. Multiple blinds on one headrail are allowed if total size is under 6,048 square inches. All blinds will operate together with one motor. |
| Option Accessories |
| Control Option |
Description |
ControlMate Motor
Item #75-1400-01 |
Includes 4 AA Lithium batteries and satellite eye Satellite eye has a 5" lead.2 |
Accessories (must be ordered separately – NOT included with ControlMate Motor)
Remote Control
Item #75-1401-00 (white) STD
Item #75-1401-05 (pewter) |
Controls blind from up to 50 feet.
Includes 3 AA Alkaline batteries. |
Day/Night Sensor
Item #75-1419-35 (black)
Item #75-1419-01 (white) |
Automatically operates blinds based on changing light conditions. Attaches to inside of window. |
AC/DC Power Pack
Item #75-1408-00 |
Six-volt Power Pack plugs directly into residential wall outlets, eliminating the need for batteries. |
NOTE: If Day/Night Sensor is ordered, a combination satellite eye and Day/Night Sensor will be shipped at Day/Night surcharge price. |
|
|
|
